Home » Services » Diamond Coring
Diamond Coring
Diamond wet cutting core rigs
Magnum Handheld Drill
Product Details:
- Four sizes of unit available capable of drilling up to Ø162 mm
- Very low maintenance with no fragile electrical components
- Low noise and high performance with increased diamond core bit life
- Hydraulic operation allows the unit to be used in underwater applications
- Quiet and spark free operation makes the Magnum ideal for use in hazardous environments
Magnum hydraulic hand held core drills provide unrivalled power for both wet & dry drilling applications. Despite their power there is little or no kick / snatch due to the inbuilt pressure operated torque limiting valve.
| Hydraulic hand drill sizes: | MAG 5 600 rpm @ 20 l/min (5.3 US gal/min) MAG 10 1000 rpm @ 20 l/min (5.3 US gal/min) MAG 15 1500 rpm @ 20 l/min (5.3 US gal/min) MAG 24 2400 rpm @ 20 l/min (5.3 US gal/min) |
| Recommended Hydraulic pressure inputs @ 20 l/min (5.3 US gal/min): |
MAG 5 70-92 bar (1000-1330 psi) MAG 10 70-112 bar (1000-1620 psi) MAG 15 70-122 bar (1000-1770 psi) MAG 24 70-126 bar (1000-1830 psi) |
| EHTMA Category: | C |
| Max. back pressure in return line: | 14 bar (200 psi) (measured at core drill) |
| Oil working temperature: | 30-70°C (86-158°F) |
| Max. power output: | 3 kW (4 hp) |
| Noise* (EN/ISO 15744): | <70 dB (1 m LPA dB re 20 µPa) |
| Vibration* (EN/ISO8662-5): <2.5 m/s² |
20-30 l/min (5.3-7.9 US gal/min) @ 140 bar (2030 psi) |
| Length: | 420 mm (16.5”) |
| Width: | 90 mm (3.5”) |
| Height: | 200 mm (7.9”) |
| Weight without hoses and drill bit: | 8 kg (17.6 lb) |
HILTI DD-100 Dry Diamond Core Drill System
Product Details:
| Height | 6 in. |
| Weight of Core Rig Motor | 12.600 lbs |
| Minimum Core Bit Diameter | 1 in. |
| Speed Under Load - setting I | 1200 rpm |
| Speed Under Load - setting II | 2400 rpm |
| Speed 3 Under Load | 3900 rpm |
| Ground Fault Interrupter | Yes |
| Approvals/Listings | Underwriter Laboratory E83368 |
| Applications | Hand held coring in brick and block without dust removal 1 in. - 5 in. diameter (6 in. available by special order). Dustless coring with bits from 1 in. - 6 in. for concrete and masonry. |
Diamond Drilling Rigs
Download the full product specification [pdf 276Kb]
Husqvarna DM 406 H Hydraulic Drill Motor
Download the full product specification [pdf 628Kb]